Pipe diameter, mm | 110 |
Pipe-sheath wall thickness, mm | 3.2 |
Insulation layer thickness, mm | 41.8 |
Operating pressure, PN | 10 |
SDR | 17 |
Pipe diameter, mm | 110 |
Pipe-sheath wall thickness, mm | 3.2 |
Insulation layer thickness, mm | 41.8 |
Operating pressure, PN | 12.5 |
SDR | 13.6 |
Pipe diameter, mm | 110 |
Pipe-sheath wall thickness, mm | 3.2 |
Insulation layer thickness, mm | 41.8 |
Operating pressure, PN | 16 |
SDR | 11 |
Pipe diameter, mm | 125 |
Pipe-sheath wall thickness, mm | 3.5 |
Insulation layer thickness, mm | 46.5 |
Operating pressure, PN | 10 |
SDR | 17 |
Pipe diameter, mm | 125 |
Pipe-sheath wall thickness, mm | 3.5 |
Insulation layer thickness, mm | 46.5 |
Operating pressure, PN | 12.5 |
SDR | 13.6 |
HDPE PUF PE pipes
The HDPE PUF PE pipe is a one-piece finished product designed for construction of water supply systems, consisting of a polyethylene pipe in polyethylene foam insulation, with a protective layer made of a polyethylene sheaths.
Identification code review
Pipe PE 100 SDR17 – 110х6.6 – 200 – PUF – PE
Let’s review the symbols for marking the HDPE pipe in polyethylene foam insulation:
- PE 100 – polyethylene grade;
- SDR17 – standard dimensional factor (determines the pipe strength);
- 110 mm – pipe diameter;
- 6.6 – pipe wall thickness (mm);
- 200 – pipe sheaths diameter (mm);
- PUF – PE – polyethylene foam insulation, protective sheaths from polyethylene.
The scope of supply of the HDPE PUF PE pipe
1) PUF PE steel elbows
2) PUF PE steel T-pipes
3) PUF PE steel T-pipes complete with vent pipe ball valve
4) PUF PE parallel steel T-pipes
5) PUF PE steel tee branches
6) PUF PE steel tee branches with reducing connections
7) Sliding saddles
8) Fixed saddles
9) End fittings of PUF PE pipelines with looped conductors
10) PUF PE reducers
11) PUF PE ball valves
12) PUF PE U-shaped elements
13) PUF PE Z-shaped elements
14) PUF PE expansion bellows
15) PUF PE ball valves with vent pipe
16) PUF PE joint isolation sets