PUF steel parallal tees
Parallel side nozzle tees (h-tees) are used for distribution or mixing of heat carrier flows within the remote heating utility piping. The side nozzle in such item is bent by 90 deg., accordingly, the nozzle runs parallel to the main flow section. Such h-tees, as well as all prefab PUF-insulated steel tubes, are manufactured by the same method, under observance of GOST 30732-2020.
Dependent on the design requirements of the customer, such h-tees could have different parameters and prices. Subject to individual selection are the length and the height of the side bent nozzle, the diameter, the protective cover type. For overground utility, the item is clad with galvanized steel sheet, for underground utility, the item features a PE protective sheath. The insulation thickness depends on the climate. For cold climate, thermal insulation of heavy-duty type is used. By diameter, prefab PUF-insulated h-tees can be with equal and reduced bore side nozzles. H-tees with reduced side nozzles can be identified by the reduced diameter of the side nozzle.
Attention! Be careful with the selection of the fittings since they must match the main medium conveyance pipe.
Technicians of PK ‘Saverhot’ LLC will answer all your questions and assist you in the selection of suitable material for reasonable price. Check the prices, buy and configure the delivery on-line, in our company’s web site.
Q&A
- Certificate of quality for the batch of products in original..
- Complete list of certificates, including quality certificates, on the materials, feedstocks and components used to manufacture a specific batch of products.
- Report on all the performed tests.
- Certificate of compliance with GOST 30732-2020.
- CMR.
- Consignment note.
- VAT invoice.
- Upon the customer’s request, we can provide the Universal transfer document (UTD).
See all Q&A
It will be interesting