Pipe diameter, mm | 20 |
Base width, mm | 120 |
Base length, mm | 340 |
Specifications
Pipe diameter, mm | 20 |
Base width, mm | 120 |
Base length, mm | 340 |
Specifications
Pipe diameter, mm | 25 |
Base width, mm | 120 |
Base length, mm | 340 |
Specifications
Pipe diameter, mm | 25 |
Base width, mm | 120 |
Base length, mm | 340 |
Specifications
Pipe diameter, mm | 32 |
Base width, mm | 120 |
Base length, mm | 340 |
Specifications
Sliding saddles 313.ТС.008
Sliding saddles 313.ТС.008 are clamp-type sliding saddles for PUF pipes.
They are produced in accordance with 313.ТС.008 technical requirements.
Identification code review
Russian abbr.: Опора скользящая 313.ТС.008
English abbr.: Sliding saddle 313.ТС.008
Below is the marking explanation:
1. «219/315» – designed for pipes of 219mm in diameter and with 315mm shell thickness;
2. «313.ТС.008» - sliding saddle, clamp-type;
The main parameters of sliding saddles also are:
1) Width and length of the base;
2) Steel thickness;
3) Clamp cross-section I1;
4) Weight of one piece, kg.
Dimensions and characteristics
Main pipe diameter, mm | External shell diameter, mm | Base width B, mm | Base length L, mm | Steel thickness S, mm | Clamp cross-section I1 | Weight of one piece, kg. |
---|---|---|---|---|---|---|
33,5; 42,3; 48 | 125 | 120 | 340 | 3 | 50х3,0 | 3,67 |
57 | 125 | 120 | 340 | 3 | 50х3,0 | 3,67 |
57 | 140 | 120 | 340 | 3 | 50х3,0 | 3,79 |
76 | 140 | 120 | 340 | 3 | 50х3,0 | 3,79 |
76 | 160 | 120 | 340 | 3 | 50х3,0 | 3,95 |
89 | 160 | 120 | 340 | 3 | 50х3,0 | 3,95 |
89 | 180 | 180 | 340 | 3 | 50х3,0 | 7,3 |
108 | 180 | 180 | 340 | 3 | 50х3,0 | 7,3 |
108 | 200 | 180 | 340 | 3 | 50х3,0 | 7,2 |
114 | 200 | 180 | 340 | 3 | 50х3,0 | 7,2 |
114 | 225 | 180 | 340 | 3 | 50х3,0 | 7,4 |
133 | 225 | 180 | 340 | 3 | 50х3,0 | 7,4 |
133 | 250 | 180 | 340 | 3 | 50х3,0 | 7 |
159 | 250 | 180 | 340 | 3 | 50х3,0 | 7 |
159 | 280 | 280 | 340 | 4 | 50х4,0 | 12,1 |
219 | 315 | 280 | 340 | 4 | 50х4,0 | 12,5 |
219 | 355 | 280 | 340 | 4 | 50х4,0 | 12,6 |
273 | 400 | 280 | 340 | 4 | 50х4,0 | 12,9 |
273 | 450 | 380 | 340 | 6 | 50х6,0 | 29,1 |
325 | 450 | 380 | 340 | 6 | 50х6,0 | 29,1 |
325 | 500 | 380 | 340 | 6 | 50х6,0 | 30 |
426 | 560 | 380 | 340 | 6 | 50х6,0 | 31,1 |
426 | 630 | 500 | 340 | 6 | 50х6,0 | 38,2 |
530 | 710 | 500 | 340 | 6 | 50х6,0 | 40 |
630 | 800 | 500 | 340 | 6 | 50х6,0 | 41,1 |
720 | 900 | 500 | 340 | 8 | 50х8,0 | 77,5 |
820 | 1000 | 500 | 340 | 8 | 50х8,0 | 98 |
Данная опора устанавливается при надземной прокладке и в канале. Усилие при затягивании хомутов не должно превышать 0,8 МПа. Наибольшая вертикальная нагрузка на опору 600 кгс. |
Scope of supply of sliding saddles 313.ТС.008
1) PUF PE steel pipes2) PUF PE steel T-pipes
3) PUF PE steel T-pipes complete with vent pipe ball valve
4) PUF PE parallel steel T-pipes
5) PUF PE steel tee branches
6) PUF PE steel tee branches with reducing connections
7) PUF PE elbows
8) Fixed saddles
9) End fittings of PUF PE pipelines with looped conductors
10) PUF PE reducers
11) PUF PE ball valves
12) PUF PE U-shaped elements
13) PUF PE Z-shaped elements
14) PUF PE expansion bellows
15) PUF PE ball valves with vent pipe
16) PUF PE joint isolation sets